Gearbox: All-metal simulated planetary 4-speed gearbox, the front and rear drive can be disconnected, and the low-speed four-wheel drive torque can be amplified by 4 times. Simulate timely four-wheel drive function
Axle: CNC integrated design non-assembled structure, metal axle with locking difference function
Car shell: The hood can be opened, the five doors can be opened, the side plates of the roll cage wheel eyebrows are all processed by aluminum alloy CNC, and the roof is CNC processed by ABS material and can be removed
Chassis: Front and rear suspension with disconnectable anti-roll bars, front and rear four-link structure
Battery specification: 3S, 5200mAh, 11.1V, above 25C; battery compartment size: 142*45*30MM (battery size can be within this range, excluding battery)
Weight: 6KG, (excluding electronic equipment such as batteries and remote control, the motor has been installed in the gearbox)
Remarks: The vehicle does not come with steering gear, ESC, remote control, sound group, and winch. The whole car needs 6 9G steering gears (DMC809 is recommended), one standard steering gear, the whole vehicle has the function of axle lock difference, anti-roll bar disconnection function, the steering gear is installed on the steering wheel to realize parallel rotation with the steering, and the engine belt can be rotated remotely , The front drive of the gearbox can be disconnected, and the rear drive can be disconnected by hard connection to realize the function of simulating timely four-wheel drive. Two gear levers can realize 4 speeds. The torque of low-speed climbing gear can be amplified by 4 times. The gearbox motor has been installed, including inside
A lighting system is provided with the car.
규모: 1:10
크기: 길이 524, 너비 220, 높이 216, 단위 MM
포장 크기 350x490x790MM, 포장 무게 16KG
휠베이스: 휠베이스 313, 단위 MM
프론트 및 리어 쇼크 업소버 트래블: 25mm
기어박스: 전금속 모사 유성 4단 변속기, 전후륜 분리 가능, 저속 사륜구동 토크 4배 증폭 가능 적시 사륜구동 기능 시뮬레이션
차축: CNC 통합 설계 미조립 구조, 잠금 차이 기능이 있는 금속 차축
자동차 쉘: 후드를 열 수 있고 5개의 도어를 열 수 있으며 롤 케이지 휠 눈썹의 측면 플레이트는 모두 알루미늄 합금 CNC로 처리되며 지붕은 ABS 소재로 처리된 CNC로 제거할 수 있습니다.
섀시: 탈착식 안티롤 바가 있는 프론트 및 리어 서스펜션, 프론트 및 리어 4링크 구조
배터리 사양: 3S, 5200mAh, 11.1V, 25C 이상, 배터리 구획 크기: 142*45*30MM(배터리 크기는 이 범위 내일 수 있음, 배터리 제외)
무게 : 6KG (배터리, 리모콘 등 전자장비 제외, 기어박스에 모터 장착)
비고: 차량에는 스티어링 기어, ESC, 리모컨, 사운드 그룹 및 윈치가 함께 제공되지 않습니다. 전체 자동차에는 6개의 9G 스티어링 기어(DMC809 권장), 1개의 표준 스티어링 기어가 필요하며, 전체 차량에는 차축 잠금 기능, 안티 롤 바 분리 기능이 있으며, 스티어링 기어는 스티어링 휠에 설치되어 평행 회전을 실현합니다. 스티어링으로 엔진 벨트를 원격으로 회전시킬 수 있으며 기어 박스의 전면 드라이브를 분리 할 수 있으며 후방 드라이브는 하드 연결로 분리하여 적시에 4 륜구동을 시뮬레이션하는 기능을 실현할 수 있습니다.2 개의 기어 레버를 실현할 수 있습니다 4단 속도 저속 등반 기어의 토크는 4배 증폭 가능 기어박스 모터 내장